Electrolux EOB 68713 Benutzerinformation Seite 15

The middle panel has a dot in one of the cor-
ners. When you install this panel, make sure
that the dot is in the top left corner of the
glass panel.
The first glass panel has a decorative frame
and a list of shelf levels. When you install this
panel, make sure that the screen-printing is
on the outer side. Make sure that the surface
of the glass panel frame is not rough when
you touch it.
D
Shelf support rails
You can remove the shelf support rails to
clean the side walls.
Removing the shelf support rails
1. Pull the front of the shelf runners away
from the side wall.
D
A
2. Pull the shelf runners from the back of the
side wall to remove the shelf support rails.
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! Make sure that the retaining pins
on the telescopic shelf runners point to the
front.
Oven ceiling
You can remove the heating element on the
oven ceiling to clean the oven ceiling easily.
Warning! Before you remove the
heating element switch off the
appliance. Make sure that the appliance
is cold. There is a risk of burns!
1. Remove the screw which holds the heat-
ing element. At first time, use a screw-
driver.
electrolux 15
2