Electrolux EOB 68713 Benutzerinformation Seite 11

Clock functions
Symbol Function
Minute Minder
Duration
End Time
You can use Duration and End Time at
the same time, if the appliance is to ac-
tivated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration
and End Time , the appliance deacti-
vates the heating elements after 90 % of
the set time. The appliance uses the re-
sidual heat to continue the cooking
process until the time ends (3-20 mi-
nutes).
Setting the clock functions
1. Touch
again and again until the dis-
play shows the necessary clock function
and the related symbol.
2. Touch + or - to set the necessary time.
Touch OK to confirm.
After 90 % of the set time, an acoustic
signal sounds. The appliance deacti-
vates. The display shows a message.
3. Touch a sensor field to stop the signals.
With Minute Minder you must activate
the appliance to set the clock function.
With Duration and End Time the appli-
ance deactivates automatically.
With Duration and End Time you must
set the heating function and the temper-
ature first. Then you can set the clock
function.
When you use Food Probe, Duration
and End Time do not work.
Extra Time
The Time Extension makes the oven function
continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance.
To set how long the appliance has to be in operation (max. 23 h
59 min).
To set the switch-off time for an oven function (max. 23 h 59 min).
• Not applicable for oven functions with
Meatprobe .
Activating the function:
1. When the cooking time ends, an acoustic
signal sounds. Touch any sensor field.
2. The display shows the message for Extra
Time for five minutes.
3. Touch
4. Set Time Extension period. Touch OK to
confirm.
SET+GO
SET+GO function lets you set an oven func-
tion (or programme) and use it later with one
touch of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Touch
play shows Duration .
4. Set the time.
5. Touch
play shows SET+GO .
6. Touch OK to confirm.
To start SET+GO touch any sensor field (ex-
cept
When the oven function ends, an acoustic
signal sounds.
When the oven function operates, the
function Key Lock is on.
You can activate and deactivate the SET
+GO function in the Basic Settings
menu.
Heat+Hold
The Heat+Hold function keeps prepared
food warm at 80° for 30 minutes. It activates
after the baking or roasting procedure ends.
Description
to activate.
again and again until the dis-
again and again until the dis-
). The set oven function starts.
electrolux 11