Deye Spring SE-F12 Bedienungsanleitung Seite 26

For Wall-mounted:
2) Drill 9 holes on the wall,with a diameter of 8 mm and depth of 100~110mm.
Note!
* When drilling holes, pay attention to prevent dust from entering the battery, which may affect the
battery performance and function.
* After drilling, never forget to clean up the floor.
3) Fix 2 hooks onto the wall with 9 expansion bolts (M6*100).
4) Carry the battery and hang it onto the hooks, making sure all bracket mounts on the back of the
battery are securely fastened to the hooks on the wall. It is recommended to only lock the two
upper bolts (M4*12) on both sides of the main body.
2 5