Toro Flex-Force Power System Bedienungsanleitung Seite 116

Installing the Shoulder Harness
Important:
If you are using the string trimmer with a 6.0 Ah or
greater battery pack installed, install the shoulder harness (Part No.
139-5334).
Do not use the shoulder harness if you are powering the tool with the
backpack and backpack tether; use only the backpack harness.
1. Install the collar to the handle knob
1. D-ring
2. Pull here to secure the collar to the
blower.
2. Connect the clip on the shoulder harness to the D-ring of the collar
(Figure 6).
(Figure
Figure 5
3. Strap collar
12
5).
g484060