Mounting The Battery Pack - Propain Sresh Sl Aufbauanleitung / Betriebsanleitung

// MOUNTING THE BATTERY PACK

2. 3.
1.
8 Nm
1. Slide the battery into the down tube from below, screw in the hex bolt with a 4 mm hex and tighten it to 8 Nm.
2. Connect the plug to the battery.
→ The plug can only be inserted in one position. Check the correct alignment of the plug before connecting.
→ You will hear a clicking sound when the plug is engaged in the battery.
3. Attach the drive unit cover and turn the locking bolt by hand 90° in the "Close" direction. Check the tight fit of the drive unit cover.
1.
2.
3.
63