Sentiotec RB 2,5 kW Montage- Und Gebrauchsanweisungen Seite 8

Instructions for installation and use
● Before the sauna control unit is switched on, make sure that no
flammable objects have been placed on the sauna heater or on
the auxiliary evaporator.
● Never touch the auxiliary evaporator while it is in operation. The
surface of the auxiliary evaporator becomes very hot.
● Avoid direct contact with the steam emitted during operation. The
steam emitted is very hot and there is a risk of scalding.
● Do not put herbs, essences or fragrances directly into the evapo-
rator tank, but only into the ceramic bowl over the evaporator.
● NEVER pour water into the hot evaporator tank. Check and fill
the evaporator tank each time before starting combi mode. If
the overheating protection has switched off the heating of the
evaporator or if your sauna control unit reports a lack of water,
allow the evaporator to cool down BEFORE you pour water into
the evaporator tank. The device must be disconnected from the
mains while being filled or cleaned.
● For your own safety, consult your supplier in the event of prob-
lems that are not described in sufficient detail in the operating
instructions.
p. 8/26