Troubleshooting - Sentiotec Rb 2,5 Kw Montage- Und Gebrauchsanweisungen

Instructions for use for the user

8. Troubleshooting

Problem: Evaporator doesn't work although there is voltage.
Troubleshooting: Check the excess temperature fuse:
WARNING!
Risk of electric shock
● Perform the following work only when the power supply is disconnected.
There are 2 temperature-switches located in the connection area:
● 1 Temperature switch
Self-resetting temperature fuse. This fuse triggers, if too less water is inside
the evaporator tank. The heating element switches off and an error message
occurs on the display of the sauna control unit.
● 2 Excess temperature fuse
This fuse triggers, if the evaporator tank gets too hot and protects the hea-
ting element from damage. To reset the fuse, press the metal-clip 3 in the
middle of the fuse.
3
p. 23/26
1
2
EN