Installation On The Concept R Sauna Heater - Sentiotec Rb 2,5 Kw Montage- Und Gebrauchsanweisungen

Installation instructions, only for experts

4.4. Installation on the Concept R sauna heater

Your can upgrade your Finnish Concept R sauna heater to a combi heater with
the auxiliary evaporator. However, you need to check that your sauna control is
suitable for combi-mode.
Observe the safety distances Fig. 1 (page 12) and Fig. 5, Fig. 6 Fig. 7
(page 14, 15).
1. Loosen the screws 1 on the side of the Concept R sauna heater 2 that
you wish to use.
2. Attach the mounting rail 3 to the Concept R sauna heater as in Fig. 6 with
the screws 1 . Observe the minimum distances in your heater's operating
instructions when selecting the sauna heater's installation location.
3. Mount the evaporator 4 on the mounting rail 3 starting at the top. Make
sure that the evaporator is flush against the wall.
4. Secure the evaporator 4 using the supplied screws 5 on the mounting rail 3 .
Fig.5 Unscrew the screws on the Concept R sauna heater
1
p. 13/26
1
2
EN