Starting Up; Using The Ceramic Bowl; Heating Up For The First Time - Sentiotec Rb 2,5 Kw Montage- Und Gebrauchsanweisungen

Instructions for use for the user

5. Starting up

5.1. Using the ceramic bowl

● Place the ceramic bowl on the evaporator tank as shown in the illustra-
tion on the right.

5.2. Heating up for the first time

CAUTION!
Formation of smoke and odours when heating up for the first time
Working materials from the manufacturing process will be present on the
new heating elements. These evaporate when the auxiliary evaporator
is heated up for the first time. This produces smoke and an unpleasant
odour. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the auxiliary evaporator for
the first time or if the heating elements for the auxiliary evaporator
have been replaced . This will prevent your health being impaired due to
the fumes and smoke produced when heating up for the first time.
1. Heating the evaporator for the first time
a. Select a low temperature and high humid-
ity on the sauna control unit.
b. Heat the evaporator WITHOUT water.
Do NOT remain in the sauna cabin
during this period.
► After about 15 minutes, the excess
temperature protection switches off the
evaporator.
c. Allow the evaporator to cool
(for approx. half an hour).
d. Repeat step 1. b.
e. Ventilate the sauna cabin thoroughly after
heating up.
p. 18/26