Pushbrace - R82 Wombat Basic Gebrauchsanweisung

C
D
G
B
A
Place the round bush in each side of the back
of the Wombat and mount them with the big bolt
(A). Pay attention that the two holes in the bush
are to be placed placed horizontally (B), when
the bush is fastened with the enclosed 8 mm
Allen key. Be aware of the angled face of the
bush. The bush should be mounted to the back
B
of the chair in a straight position (C).
Place the pushbrace onto the two bushes.
Place the small bolts (D) in the outer holes,
through the pushbrace and the bush. The bolt
and nut are placed in the inside and fastened
with the enclosed 3 mm Allen key.
22

pusHbraCe

GB
Do not ever use the pushbrace to lift/pull
the chair up or down from stairs, landings,
curbs etc. The chair can only be lifted by
two persons lifting the frame evenly. Never
use the pushbrace to lift the chair