Thrustmaster TX RACING WHEEL LEATHER EDITION Benutzerhandbuch Seite 12

UPDATING YOUR RACING WHEEL'S FIRMWARE
The firmware included in your racing wheel's base can be updated to a more recent version featuring
product enhancements.
To display the firmware version that your racing wheel is currently using and update it if required: on
PC, visit https://support.thrustmaster.com. Click Racing Wheels / TX Racing Wheel LEATHER
Edition, then select Firmware and follow the instructions describing the download and installation
procedure.
SETTING UP THE RACING WHEEL FOR THE XBOX SERIES X|S / XBOX
ONE
1. Connect the pedal set to the connector (16) located at the back of the racing wheel's base.
2. Connect the power supply cable to the connector (13) located at the back of the racing wheel's
base.
3. Connect the power supply cable to a mains outlet with proper voltage specifications.
For more information about this, please refer to the CONNECTING THE RACING
WHEEL TO THE MAINS section, on page 3 in this manual.
4. Connect the racing wheel's USB connector (14) to one of the console's USB ports.
You are now ready to race!
AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION
The racing wheel automatically self-calibrates when you connect the racing wheel to the mains and the
racing wheel's USB connector to the console.
During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 900-
degree angle, before stopping at the center.
Never touch the racing wheel during the self-calibration phase!
(This could cause an incorrect calibration and/or personal injuries).
WARNING:
11/24