Specifications - Sharp Multisync Pn-M982 Installationsanweisung

nOperations after first power-on
When you turn on the power for the first time, the initial setting screen appears. Navigate
the cursor to [Start] using the ▲/▼ buttons on the remote control unit and press the SET
button to start. Configure the initial settings, such as setting the language, date and time,
etc.
Turning power off
1. Press the POWER button again on the monitor or press the STANDBY button on
the remote control unit. The power is turned off. (Standby state)
Model
Power requirement
Operating
temperature*
1
Operating humidity
Operating altitude
Storage
temperature
Storage humidity
Power
consumption*
2
(Max/networked
standby mode* /
3
standby mode* /
4
off mode)
Dimensions
(excluding
protrusions)
inch (mm)
Weight lbs. (kg)
* : Temperature condition may change when using the monitor together with the optional equipments
1
recommended by SHARP. In such cases, please check the temperature condition specified by
the optional equipments.
* : Factory setting. (When no optional part is attached.)
2
* : When no optional part is attached. Time for power management function: 20 sec.
3
Only when the input is USB-C, time for power management function: 3 min.
* : When no optional part is attached. Time for power management function: 3.5 min.
4

Specifications

PN-M752
AC 100 - 240 V,
4.6 A - 1.9 A, 50/60 Hz
32 °F to 104 °F (0 °C to 40 °C)
20% to 80% (no condensation)
-4 °F to 140 °F (-20 °C to 60 °C)
10% to 80% (without condensation)
140 W
(410 W/2.0 W/
0.5 W/0.0 W)
Approx. 66-1/4 (W) x
3-1/4 (D) x
37-13/16 (H)
(1682.3 x 83.2 x
961.1)
Approx. 83.8 (38.0)
PN-M862
AC 100 - 240 V,
5.9 A - 2.4 A, 50/60 Hz
3000 m or less
190 W
(525 W/2.0 W/
0.5 W/0.0 W)
Approx. 75-7/8 (W) x
3-1/4 (D) x
43-1/4 (H)
(1927.6 x 83.2 x
1099.1)
Approx. 103.6 (47.0)
PN-M982
AC 100 - 240 V,
6.7 A - 2.7 A, 50/60 Hz
210 W
(595 W/2.0 W/
0.5 W/0.0 W)
Approx. 86-3/8 (W) x
3-5/16 (D) x
49-1/2 (H)
(2194.7 x 84.3 x
1250.2)
Approx. 149.9 (68.0)
17
E