Specifications - Wika R-1 Betriebsanleitung

8. Specifications

Disposal of electrical equipment
EN
DE
FR
8. Specifications
ES
8.1 Specifications
Depending on the selected instrument version (e.g. seals) the specification may deviate from the specifications listed
here. The specifications in the order documentation are definitive.
For further specifications, see WIKA data sheet PE 81.45.
Specifications
Measuring range
Maximum working pressure
Overpressure limit
Max. measured error per
IEC 61298-2
Output signal
14
This instrument is labelled in accordance with the EU Waste Electrical and Electronic
Equipment (WEEE) directive. This instrument must not be disposed of with household
waste.
Hand in old instruments for environmentally friendly disposal at a designated collec-
■
tion point for the disposal of electrical and electronic equipment.
Ensure a proper disposal in accordance with national regulations and observe the
■
currently applicable regulations.
→ See product label
→ Corresponds to the upper measuring range value / measuring range full scale value
→ Any permanent operation above the maximum working pressure is not permissible
2 times
The overpressure limit is based on the measuring range. Depending on the selected process
connection and the seal, restrictions in overpressure limit can result. The overpressure limit is
based on the measuring range. Depending on the selected process connection and the seal, re-
strictions in overpressure limit can result.
→ For the overpressure limit per process connection, see IN 00.14.
≤ ±2 % of span
→ See product label
WIKA operating instructions, model R-1