Unpacking; Delivery Contents; Placement - Canton Smart Sub 10 Anleitung

UNPACKING

Carefully unpack the Smart Sub 10 and check that the delivery content is
complete and undamaged If any part is damaged, do not use it, but contact
our service department (see back cover) Keep the packaging during the
warranty period

Delivery contents:

1x Smart Sub 10
1x Power cord
1x RCA angle adapter
4x Equipment foot, self-adhesive
1x Wall installation set
• 2x mounting angle
• 2x mounting screw (4,5 x 30)
• 2x wall plug (S6 x 30)
1x Manual

PLACEMENT

Place the Smart Sub 10 in the desired location The distance between the
Smart Sub 10 and the Smart device to be connected must not exceed approx
10m Install the Smart Sub 10 in such a way that it cannot be damaged or
cause damage
Caution:
• Make sure that the Smart Sub 10 is not raised (e g on a table) or placed
on a ledge (e g stairs)
English
3 2 3