Unpacking; Connection - Canton Smart Sub 12 Kurzanleitung

English

UNPACKING

Carefully unpack the Smart Sub 12 and check that the delivery content is complete
and undamaged. In case of damage, do not put the article into operation and con-
tact our service department (see reverse side).
Please keep the packaging during the warranty period.
Delivery contents:
1x Smart Sub 12
1x Power cord
1x Short manual

CONNECTION

Place the Smart Sub 12 in the desired location. The distance between the Smart Sub
12 and the device to be connected must not exceed 10 m. Please install the Smart
Sub 12 in such a way that it cannot be damaged or cause damage.
Note:
• Please make sure that the Smart Sub 12 is not raised (e.g. on a table) or placed
on a ledge (e.g. stairs).
3 1 7