Canton Smart Sub 10 Anleitung Seite 29

Wireless connection with Smart floorstanding- / compact speakers:
Note:
• In order to be able to pair the Smart Sub 10 with a Smart speaker, the
Smart Sub 10 to be (newly) connected must have been disconnected
from the mains for at least 30 seconds beforehand
Turn on the Smart speaker (master) using the „Power" button and press
1
the menu button „M" on the Smart remote control to access the main
menu of the speaker
Select [WIS] „Wireless Setup" using the arrow keys „ / " and press „OK"
2
Now, select [WSP] „Wireless Pairing" and confirm with the „OK" button
First, use the arrow keys „ / " to select and confirm (once again) the
3
master loudspeaker The following are available:
[MFL] = Master Front Left | [MCE] = Master Center
[MFR] = Master Front Right | [MSR] = Master Surround Right
[MSL] = Master Surround Left
Confirm your selection of the master speaker with the „OK" button to be
4
able to pair (connect) another Smart speaker
Use the arrow keys „ / " to select the speaker you want to pair The
5
following channels are available:
[FL] = Front Left | [FR] = Front Right | [CE] = Center
[SL] = Surround Left | [SR] = Surround Right | [SUB] = Subwoofer
Select [SUB] „Subwoofer" to pair the Smart Sub 10
Press the „OK" button The display shows [PIR] „Pairing Sub"
6
Now, connect the Smart Sub 10 to the power outlet
7
Approx 10–20 seconds after the subwoofer has been connected to the
8
mains, the status changes and the display shows [CON] „connected"
Smart speaker and subwoofer are connected, now Press the menu button
„M" repeatedly or wait 30 seconds to exit the menu
English
3 2 9