Using The Accessories; Inserting The Accessories - JUNO JB061B5 Benutzerinformation

You can use the functions
Duration
same time to set the time for
how long the appliance should
operate and when the appliance
should deactivate. This lets you
activate the appliance with a
delay in time. First set the
Duration
.
Setting the clock functions
For Duration and End
function and temperature of cooking. This is
not necessary for the Minute Minder
1. Press again and again until the
indicator for the necessary clock
function starts to flash.
2. Press or
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function
you set.

USING THE ACCESSORIES

WARNING! Refer to Safety
chapters.

Inserting the accessories

Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
and End at the
and then the End
, set an oven
to set the time for the
For the Minute Minder function
the display shows the time left.
3. When the time ends the indicator of the
clock function flashes and an acoustic
signal sounds. Press a button to stop
the signal.
4. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
With the Duration
deactivates automatically.
Cancelling the clock functions
1. Press the
.
necessary function indicator flashes.
2. Press and hold
The clock function goes out after some
seconds.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim around
the shelf prevents cookware
from slipping.
and End
functions, the appliance
again and again until the
.
9