Herunterladen Diese Seite drucken

Dell PowerEdge R810 Informationsaktualisierung

Intel xeon processor e7-2800/4800/8800 product family
Vorschau ausblenden Andere Handbücher für PowerEdge R810:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
Dell PowerEdge R810, R910,
and M910 Systems
Intel Xeon Processor
E7-2800/4800/8800
Product Family—
Information Update

Werbung

loading

Inhaltszusammenfassung für Dell PowerEdge R810

  • Seite 1 Dell PowerEdge R810, R910, and M910 Systems Intel Xeon Processor E7-2800/4800/8800 Product Family— Information Update...
  • Seite 2 © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc. ® ®...
  • Seite 3 (PowerEdge R910 II and R810 II) or on the blade handle (PowerEdge M910 II). See Figure 1. NOTE: PowerEdge R810, R910, and M910 systems without the Roman numeral “II” support Intel Xeon processor E7-2800/4800/8800 product family with a limited feature set.
  • Seite 4 New System Features—Dell PowerEdge Systems (R810, R910, and M910) Table 1 provides the list of new features supported by the new Dell PowerEdge systems (R810 II, R910 II, and M910 II). NOTE: The new systems with E7 processors and marked with the Roman numeral "II"...
  • Seite 5 Not offered E7-2803 * PowerEdge R810 systems support 4 x 130 W Intel Xeon processor E7-4800/8800 product family only if the system has two power supply units. PowerEdge R810 systems do not support 4 x130 W Intel Xeon processor 7500 series.
  • Seite 6 • Memory riser (PowerEdge R910 II) marked with the Roman Numeral "II" or system board (PowerEdge R810/M910 II) with Intel 7510 scalable memory buffer. Supported DDR3L are 2 GB x8, 4 GB x8, 8 GB x8, and 16 GB x4 DRAM RDIMMs.
  • Seite 7 • Memory riser (PowerEdge R910) not marked with the Roman Numeral "II" or system board (PowerEdge R810/M910) with Intel 7500 scalable memory buffer. DDR3L memory is backward compatible with Intel Xeon processor 7500 series and operates at standard voltage (1.5 V).
  • Seite 8 Processor Settings Screen Option Description Virtualization Set to Enabled for TXT security feature support. Technology NOTE: Disable this feature if your system does not run (Disabled default) virtualization software. C States When set to Enabled for power savings, the processor(s) (Enabled default) can operate in C6 and package C3e states.
  • Seite 9 Message Description No Configurable memory There is a system memory configuration problem. detected. System Halted. Memory bus redundancy The PowerEdge R910 memory riser fails to support feature unavailable on memory bus redundancy. Memory Riser X. System can continue to operate normally without redundancy.
  • Seite 10 Settings screen of the system setup, this feature can be enabled or disabled using the following BIOS setup options. NOTE: The Dell BIOS Intelligent Turbo Mode is disabled when the Turbo mode is set to Disabled in the Processor Settings screen. Setup Screen...
  • Seite 11 Dell PowerEdge R810、R910 和 M910 系统 Intel Xeon 处理器 E7-2800/4800/8800 产品系列— 信息更新...
  • Seite 12 丢失。 警告: “警告”表示可能会导致财产损失、人身伤害甚至死亡。 ____________________ 本出版物中的信息如有更改,恕不另行通知。 © 2011 Dell Inc. 版权所有,翻印必究。 未经 Dell Inc. 书面许可,严禁以任何形式复制这些材料。 本文中使用的商标: Dell™ 、 DELL 徽标和 PowerEdge™ 是 Dell Inc. 的商标。 ® ® 和 Xeon 是 Intel Corporation 在美国 和其它国家 / 地区的注册商标。 Intel 本出版物中可能使用到的其它商标和商品名称是指拥有相应标记和名称的公司或其制造的 产品。 Dell Inc. 对其它公司的商标和产品名称不拥有任何专有权。...
  • Seite 13 PowerEdge M910 II PowerEdge R910 II R810 II (PowerEdge M910 II) 注: 未标有罗马数字“II”的 PowerEdge R810、R910 和 M910 系统支持 Intel Xeon E7-2800/4800/8800 产品系列处理器的有限功能组。 图 1. 使用罗马数字 “ II ”标识新的 Dell PowerEdge 系统 PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II 信息更新...
  • Seite 14 ( R810 、 R910 和 M910 ) Dell PowerEdge R810 II R910 II M910 II 注: 采用 E7 处理器并标有罗马数字“II”的新系统支持采用 Intel Xeon 7500 系列处理器并未标有罗马数字“II”的系统支持的所有功能。 表 1. 全新系统功能 — Dell PowerEdge 系统 ( R910 、 R810 和 M910 ) PowerEdge PowerEdge PowerEdge PowerEdge R810/R910/ R810/R910/...
  • Seite 15 E7-4807 未提供 E7-2870 未提供 E7-2860 未提供 E7-2850 未提供 E7-2830 未提供 E7-2820 未提供 E7-2803 PowerEdge R810 130 W Intel Xeon E7-4800/8800 PowerEdge R810 130 W Intel Xeon 7500 • Intel Xeon 7500 E7-2800/4800/8800 • 注: 要解决此问题,禁用系统设置程序的 Processor Settings(处理器设置) 屏幕中的 Logical Processors(逻辑处理器),或减少系统设置程序的...
  • Seite 16 DDR3L RDIMM • Intel Xeon E7-2800/4800/8800 • (PowerEdge R910 II) Intel 7510 (PowerEdge R810/M910 II) DDR3L 2 GB x8 4 GB x8 8 GB x8 16 GB x4 DRAM RDIMM 注: 额定速率为 1333 MT/s 的 RDIMM 以 1066 MT/s 的最大速率运行。...
  • Seite 17 系统设置更新 Memory Settings (内存设置)屏幕 选项 说明 System Memory Voltage Memory Operating Auto Voltage DIMM DIMM DIMM Auto 1.35 V (1.5 V) Redundant Memory Mirror Spare Disabled [ DDDC 注: 有效的 DDDC 配置需要所有安装的 DIMM 带有 x4 DRAM。 Processor Settings (处理器设置)屏幕 选项 说明...
  • Seite 18 Security Settings (安全设置)屏幕 选项 说明 Intel AES-NI Advanced Encryption Standard with New Instructions Enabled Enabled Activated Intel TXT Disabled [ 新的 POST 信息 信息 说明 System Memory Size: XX.X GB, System Memory Speed: XXXX MHz, Voltage: 1.5V or 1.35V XX.X GB XXXX 1.5V 1.35V...
  • Seite 19 信息 说明 CPU X Failed Initialization BIOS IERR CPU X No Configurable memory detected. System halted. Memory bus redundancy PowerEdge R910 feature unavailable on Memory Riser X. System can continue to operate normally without redundancy. Recommend power-down and reseat Riser X or strike <F1> key to continue without redundancy.
  • Seite 20 信息 说明 Memory Initialization PowerEdge R910 4 Gb DRAM Warning: Memory size RDIMM Intel Xeon 7500 and/or performance may be reduced. DIMM unsupported: Memory Riser <X DIMM 1 > Memory Riser X Lockstep Pair <DIMM 1 & DIMM 2> disabled. Unsupported Buffer/Processor and Memory Configuration.
  • Seite 21 启用 Dell BIOS 智能 Turbo 模式 Dell BIOS Turbo turbo turbo Processor Settings turbo BIOS 注: 如果在 Processor Settings(处理器设置)屏幕中将 Turbo 模式设置为 Disabled(已禁用),则会禁用 Dell BIOS 智能 Turbo 模式。 设置屏幕 字段 字段值 智能 Turbo CPU Power and Performance OS DBPM Management CPU...
  • Seite 22 信息更新...
  • Seite 23 Systèmes Dell PowerEdge R810, R910 et M910 Famille de processeurs Intel Xeon E7-2800/4800/8800 — Mise à jour des informations...
  • Seite 24 D'autres marques et noms commerciaux peuvent être utilisés dans ce document pour faire référence aux entités revendiquant la propriété de ces marques ou de ces noms de produits. Dell Inc. rejette tout intérêt propriétaire dans les marques et les noms commerciaux autres que les siens.
  • Seite 25 (PowerEdge M910 II). Voir la figure 1. REMARQUE : les systèmes PowerEdge R810, R910 et M910 sans le chiffre romain « II » prennent en charge la famille de processeurs Intel Xeon E7-2800/4800/8800 mais avec un ensemble limité de fonctions.
  • Seite 26 Figure 1. Identification des nouveaux systèmes Dell PowerEdge comportant le chiffre romain « II » PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II Mise à jour des informations...
  • Seite 27 PowerEdge (R810, R910 et M910) Le tableau 1 présente la liste des nouvelles fonctionnalités prises en charge par les nouveaux systèmes Dell PowerEdge (R810 II, R910 II et M910 II). REMARQUE : les nouveaux systèmes dotés de processeurs E7 et comportant le chiffre romain «...
  • Seite 28 Non disponible E7-2803 * Les systèmes PowerEdge R810 ne prennent en charge la famille de processeurs Intel Xeon E7-4800/8800 4 x 130 W que si le système est doté de deux blocs d'alimentation. Les systèmes PowerEdge R810 ne prennent pas en charge les processeurs Intel Xeon série 7500 4 x 130 W.
  • Seite 29 • Carte de montage de mémoire (PowerEdge R910 II) comportant le chiffre romain « II » ou carte système (PowerEdge R810/M910 II) avec mémoire tampon évolutive Intel 7510 Les barrettes DDR3L prises en charge sont les suivantes : barrettes RDIMM DRAM 2 Go x8, 4 Go x8, 8 Go x8 et 16 Go x4.
  • Seite 30 • Carte de montage de mémoire (PowerEdge R910) ne comportant pas le chiffre romain « II » ou carte système (PowerEdge R810/M910) avec mémoire tampon évolutive Intel 7500 La mémoire DDR3L memory est compatible avec le processeur Intel Xeon série 7500 et fonctionne sous une tension standard (1,5 V).
  • Seite 31 Mises à jour apportées à la configuration du système Écran Memory Settings (Paramètres de la mémoire) Option Description System Memory Affiche la tension de fonctionnement actuelle. Voltage (Tension de la mémoire système) Memory Operating Définit le choix de tension de la mémoire système. Voltage (Tension de Si l'option Auto est sélectionnée, le système définit fonctionnement...
  • Seite 32 Écran Processor Settings (Paramètres du processeur) Option Description Virtualization L'option Enabled permet la prise en charge de la fonction Technology de sécurité TXT. (Technologie de REMARQUE : désactivez cette fonctionnalité si le système ne virtualisation) prend pas en charge le logiciel de virtualisation. (option par défaut : Disabled [Désactivé]) C States (États C)
  • Seite 33 Nouveaux messages de l'auto-test de démarrage Message Description System Memory Size : Affiche l'espace mémoire disponible, la vitesse mémoire du système et la tension de fonctionnement actuelle du XX.X GB, System Memory système. Speed: XXXX MHz, Voltage: 1.5V or 1.35V TXT error occurred during La configuration n'est pas correcte ou ne prend pas en charge la fonction TXT.
  • Seite 34 Message Description MemBIST error: Memory Affiche l'emplacement de la carte de montage de Riser X DIMM <1> mémoire et du logement DIMM du module de mémoire défaillant. Memory Initialization La carte de montage de mémoire PowerEdge R910 Warning: Memory size dispose de barrettes RDIMM DRAM de 4 Go mais le and/or performance may be processeur n'est pas pris en charge (Intel Xeon processor...
  • Seite 35 Activation de la fonction Dell BIOS Intelligent Turbo Mode (Mode Turbo intelligent du BIOS Dell) La fonction Dell BIOS Intelligent Turbo Mode permet au système d'exploitation d'appliquer le mode turbo aux performances du processeur. En fonction de l'utilisation du processeur, cette fonction permet de retarder l'activation du mode turbo du processeur, avec pour conséquence une...
  • Seite 36 Mise à jour des informations...
  • Seite 37 Dell PowerEdge R810, R910 und M910-Systeme Intel Xeon-Prozessoren der Produktfamilie E7-2800/4800/8800 – Informationsaktualisierung...
  • Seite 38: Anmerkungen, Vorsichtshinweise Und Warnungen

    © 2011 Dell Inc. Alle Rechte vorbehalten. Die Vervielfältigung oder Wiedergabe dieser Materialien in jeglicher Weise ohne vorherige schriftliche Genehmigung von Dell Inc. ist strengstens untersagt. In diesem Text verwendete Marken: Dell™, das DELL Logo und PowerEdge™ sind Marken von ® ®...
  • Seite 39 Wichtige Informationen Die folgenden neuen Dell PowerEdge-Systeme unterstützen die Intel Xeon- Prozessoren der Produktfamilie E7-2800/4800/8800: • PowerEdge R810 II • PowerEdge R910 II • PowerEdge M910 II Diese System sind mit der römischen Ziffer „II“ auf dem Systemidentifikations- feld (PowerEdge R910 II und R810 II) oder auf dem Blade-Griff (PowerEdge M910 II) gekennzeichnet.
  • Seite 40 Abbildung 1. Identifizierung neuer Dell PowerEdge-Systeme mit der römischen Ziffer II PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II Informationsaktualisierung...
  • Seite 41 Neue Systemfunktionen – Dell PowerEdge- Systeme (R810, R910 und M910) Tabelle 1 enthält die Liste der neuen Funktionen, die von den neuen Dell PowerEdge-Systemen (R810 II, R910 II und M910 II) unterstützt werden. ANMERKUNG: Die neuen Systeme mit E7-Prozessoren und der römischen Ziffer „II“...
  • Seite 42 E7-2820 Nicht angeboten E7-2803 * PowerEdge R810-Systeme unterstützen nur dann 4 x 130 W Intel Xeon- Prozessoren der Produktfamilie E7-4800/8800, wenn die Systeme über zwei Netzteile verfügen. PowerEdge R810-Systeme bieten keine Unterstützung für 4 x 130 W Intel Xeon-Prozessoren der Serie 7500.
  • Seite 43 Intel Xeon-Prozessoren der Produktfamilie E7-2800/4800/8800 • Speicher-Riser (PowerEdge R910 II), gekennzeichnet mit der römischen Ziffer „II“, oder Systemplatine (PowerEdge R810/M910 II) mit skalierbarem Intel 7510-Speicherpuffer Folgende DDR3L werden unterstützt: 2 GB x8, 4 GB x8, 8 GB x8 und 16 GB x4 DRAM-RDIMMs.
  • Seite 44 • PowerEdge R810 unterstützt nur dann vier 130 W Intel Xeon-Prozessoren der Produktfamilie E7-4800/8800, wenn DDR3L-DIMMs bei 1,35 V verwendet werden. • Eine PowerEdge R910 Speicher-Riserkarte, die mit der römischen Ziffer „II“ gekennzeichnet ist, unterstützt DDR3L-RDIMMs. • PowerEdge R910 unterstützt keine Kombination von Speicher-Risern mit und ohne römische Ziffer „II“.
  • Seite 45 Aktualisierungen des System-Setups Bildschirm Memory Settings (Speichereinstellungen) Option Beschreibung System Memory Zeigt die derzeitige Betriebsspannung des Systemspeichers Voltage Memory Operating Zur Spannungsauswahl des Systemspeichers. Bei der Voltage Einstellung Auto legt das System automatisch die optimale (Standardeinstellung Einstellung für die Systemspannung fest, basierend auf der Auto) DIMM-Kapazität und der installierten DIMM-Belegung.
  • Seite 46 Bildschirm Security Settings (Sicherheitseinstellungen) Option Beschreibung Intel AES-NI Anzeige des Status der AES-NI-Datenverschlüsselung (Standardeinstellung (Advanced Encryption Standard with New Instructions). Enabled [Aktiviert]) Mit den Einstellungen Enabled (Aktiviert) und Activated (Aktiv) wird die TXT-Funktion unterstützt. Intel TXT Ermöglicht den Einsatz von TXT (Trusted Execution (Standardeinstellung Technology) für mehr Sicherheit.
  • Seite 47 Meldung Beschreibung Memory bus redundancy Der PowerEdge R910-Speicher-Riser kann die feature unavailable on Speicherbusredundanz nicht unterstützen. Memory Riser X. System can continue to operate normally without redundancy. Recommend power-down and reseat Riser X or strike <F1> key to continue without redundancy. MemBIST error: Memory Anzeige der Position des Speicher-Risers und des Riser X DIMM <1>...
  • Seite 48 Processor Settings (Prozessoreinstellungen) des System-Setups aktiviert ist, kann die Funktion mit den folgenden BIOS-Setup-Optionen aktiviert oder deaktiviert werden: ANMERKUNG: Die Funktion Dell BIOS Intelligent Turbo Mode ist deaktiviert, wenn der Turbo Mode im Bildschirm Processor Settings (Prozessoreinstellungen) deaktiviert ist Einstellung (Disabled). Setup-...
  • Seite 49 Dell PowerEdge R810/R910/ M910 システム Intel Xeon プロセッサ E7-2800/4800/8800 製品 シリーズ — アップデート情報...
  • Seite 50 手順に従わないと、ハードウェアの損傷やデータの損失につながる 可能性があることを示しています。 警告: 物的損害、けが、または死亡の原因となる可能性があることを示 しています。 ____________________ 本書の内容は予告なく変更されることがあります。 © 2011 すべての著作権は Dell Inc. にあります。 Dell Inc. の書面による許可のない複製は、いかなる形態においても厳重に禁じられてい ます。 本書に使用されている商標:Dell™、DELL ロゴ、および PowerEdge™ は Dell Inc. の商標 ® ® です。Intel および Xeon は米国その他の国における Intel Corporation の登録商標 です。 商標または製品の権利を主張する事業体を表すためにその他の商標および社名が使用され ていることがあります。それらの商標や会社名は、一切 Dell Inc. に帰属するものではあり ません。...
  • Seite 51 PowerEdge R810 II • PowerEdge R910 II • PowerEdge M910 II PowerEdge R910 II/R810 II PowerEdge M910 II メモ: PowerEdge R810/R910/M910 Intel Xeon E7-2800/4800/8800 図 1 ローマ数字 II が刻印された新しい Dell PowerEdge システム PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II...
  • Seite 52 新しい Dell PowerEdge R810 II/R910 II/M910 II によってサ ポートされている新機能のリストを 表 1 に示します。 メモ: Intel Xeon 7500 表 1 新しいシステム機能 — Dell PowerEdge システム(R910/ R810/M910) Intel Xeon 7500 Intel Xeon 7500 Intel Xeon E7 Intel Xeon E7 を PowerEdge を PowerEdge を...
  • Seite 53 プロセッサの M910 R910 R810 タイプ E7-8867L E7-8837 E7-4870 E7-4860 E7-4850 E7-4830 E7-4820 E7-4807 E7-2870 E7-2860 E7-2850 E7-2830 E7-2820 E7-2803 * PowerEdge R810 130 W Intel Xeon processor E7-4800/8800 PowerEdge R810 130 W Intel Xeon 7500 • Intel Xeon 7500 2800/4800/8800...
  • Seite 54 セントのメモリ電力を節約できます。DDR3L RDIMM を 1.35 V で使用 するための要件は、次のとおりです。 • Intel Xeon E7-2800/4800/8800 • PowerEdge R910 II Intel 7510 PowerEdge R810/M910 II サポートされている DDR3L は、2 GB x8、4 GB x8、8 GB x8、16 GB x4 DRAM RDIMM です。 メモ: 1333 MT/s RDIMM 1066 MT/s •...
  • Seite 55 32 GB x4 4 Gb DRAM DDR3L RDIMM 1.35 V DDR3L メモリモジュールを搭載したシステムは、以下のいずれ かの条件が満たされれば、1.5 V で動作します。 • Intel Xeon 7500 • • PowerEdge R910 Intel 7500 PowerEdge R810/M910 DDR3L メモリは Intel Xeon プロセッサ 7500 シリーズに対して下位互 換性を持ち、標準電圧(1.5 V)で動作します。 セットアップユーティリティに関するアップ デート情報 Memory Settings(メモリ設定)画面 オプション 説明 System Memory Voltage...
  • Seite 56 Processor Settings(プロセッサ設定)画面 オプション 説明 Virtualization Enabled Technology メモ: Disabled C States Enabled Enabled Security Settings(セキュリティ設定)画面 オプション 説明 Intel AES-NI AES-NI: Advanced Encryption Standard New Instructions Enabled Enabled Activated Intel TXT Trusted Execution Technology Disabled POST の新しいメッセージ メッセージ 説明 System Memory Size: XX.X GB, System Memory Speed: XXXX MHz, Voltage: 1.5V or 1.35V...
  • Seite 57 メッセージ 説明 Launch Control Policy TXT SINIT ACM CPU X Failed BIOS IERR Initialization No Configurable memory detected. System Halted. Memory bus redundancy PowerEdge R910 feature unavailable on Memory Riser X. System can continue to operate normally without redundancy. Recommend power- down and reseat Riser X or strike <F1>...
  • Seite 58 Dell BIOS Intelligent Turbo(インテリジェント ターボ)モードを有効にする Dell BIOS Intelligent Turbo(インテリジェントターボ)モードでは、 OS からプロセッサのパフォーマンスをターボモードに設定することが できます。これは、プロセッサの使用率に基づいて、節電のためにプロ セッサターボモードの開始を遅らせることのできる機能です。セット アップユーティリティの Processor Settings(プロセッサの設定)画 面でターボモードを有効に設定すると、以下の BIOS セットアップオプ ションを使用して、この機能の有効 / 無効を切り替えることができ ます。 メモ: Dell BIOS Intelligent Turbo Processor Settings Turbo Disabled セットアップ フィールド フィールド値 インテリジェン 画面 トターボ Power CPU Power and...
  • Seite 59 Dell PowerEdge R810, R910 및 M910 시스템 Intel Xeon 프로세서 E7-2800/4800/8800 제품군 — 정보 갱신본...
  • Seite 60 Intel 본 발행물에서 특정 회사의 상표 및 회사 이름 또는 제품을 지칭하기 위해 기타 상표 및 상호 를 사용할 수도 있습니다. Dell Inc.는 자사가 소유하고 있는 것 이외에 기타 모든 상표 및 상호 에 대한 어떠한 소유권도 없습니다. 2011 년 3 월...
  • Seite 61 (PowerEdge R910 II 및 R810 II의 경우) 또는 블레이드 핸들(PowerEdge M910 II)에 표기됩니다. 그림 1을 참조하십시오. 주: 로마 숫자 "II"가 표시되지 않은 PowerEdge R810, R910 및 M910 시스템은 일 부 기능에 한하여 Intel Xeon 프로세서 E7-2800/4800/8800 제품군을 지원합니다. 그림 1. 로마 숫자 II 로 새 Dell PowerEdge 시스템 식별하기...
  • Seite 62 새 시스템 기능 — Dell PowerEdge 시스템 (R810, R910 및 M910) 표 1에는 새 Dell PowerEdge 시스템(R810 II, R910 II 및 M910 II)이 지원하는 새 기능이 나열되어 있습니다. 주: E7 프로세서가 탑재되고 로마 숫자 "II"로 표시된 새 시스템은 Intel Xeon 프...
  • Seite 63 제공되지 않음 E7-2803 제공되지 않음 * PowerEdge R810 시스템은 전원 공급 장치가 2개 있는 경우에만 130W Intel Xeon 프로세서 E7-4800/8800 제품군의 프로세서 4개를 지원합니다. PowerEdge R810 시스 템은 130W Intel Xeon 프로세서 7500 시리즈 프로세서 4개를 지원하지 않습니다. Intel Xeon 프로세서 7500 시리즈와 E7-2800/4800/8800 제품군을 혼합하...
  • Seite 64 Intel Xeon 프로세서 E7-2800/4800/8800 제품군 • PowerEdge R910 II의 경우 로마 숫자 "II"가 표시된 메모리 라이저, • PowerEdge R810/M910 II의 경우 Intel 7510 확장형 메모리 버퍼가 있는 시 스템 보드 지원되는 DDR3L은 2GB x8, 4GB x8, 8GB x8 및 16GB x4 DRAM RDIMM입니 다.
  • Seite 65 • 메모리 모듈의 조합 PowerEdge R910의 경우 로마 숫자 "II"가 표시되지 않은 메모리 라이저, • PowerEdge R810/M910의 경우 Intel 7500 확장형 메모리 버퍼가 있는 시스 템 보드 DDR3L 메모리는 구형인 Intel Xeon 프로세서 7500 시리즈와 호환되고 표준 전압인 1.5V에서 작동합니다.
  • Seite 66 Processor Settings( 프로세서 설정 ) 화면 옵션 설명 Virtualization Enabled( Technology 주: 시스템이 가상화 소프트웨어를 사용하지 않는 경우 : Disabled( 이 기능을 비활성화합니다. C States(C Enabled( : Enabled( Security Settings( 보안 설정 ) 화면 옵션 설명 Intel AES-NI AES-NI(Advanced Encryption Standard with New : Enabled( Instructions) Enabled(...
  • Seite 67 메시지 설명 There was an error during TXT SINIT ACM invocation on the previous boot due to an error processing the Launch Control Policy CPU X Failed Initialization BIOS IERR No Configurable memory detected. System Halted. Memory bus redundancy The PowerEdge R910 feature unavailable on Memory Riser X.
  • Seite 68 Dell BIOS Intelligent Turbo 모드 활성화 Dell BIOS Intelligent Turbo 모드 기능을 사용하면 운영 체제에서 프로세서 성능을 Turbo 모드로 설정할 수 있습니다. 프로세서 활용에 따라 이 기능은 보다 효율적인 전원 관리를 위해 프로세서 Turbo 모드 초기화를 지연시킵니 다. 시스템 설치 프로그램의 Processor Settings(프로세서 설정) 화면에서...
  • Seite 69 Sistemas Dell PowerEdge R810, R910 y M910 Familia de productos de procesadores Intel Xeon E7-2800/4800/8800 Actualización de información...
  • Seite 70 Esta publicación puede incluir otras marcas y nombres comerciales que se utilicen para hacer referencia a sus titulares o a sus productos. Dell Inc. renuncia a cualquier interés sobre la propiedad de marcas y nombres comerciales que no sean los suyos.
  • Seite 71 (PowerEdge M910 II). Consulte la ilustración 1. NOTA: los sistemas PowerEdge R810, R910 y M910 que no estén marcados con el número romano “II” admiten la familia de productos de procesadores Intel Xeon E7-2800/4800/8800, pero con un número limitado de funciones.
  • Seite 72 Ilustración 1. Identificación de los nuevos sistemas Dell PowerEdge con el número romano II PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II Actualización de información...
  • Seite 73 “II” son compatibles con todas las funciones admitidas en los sistemas equipados con procesador Intel Xeon serie 7500 y que no incorporan la marca “II”. Tabla 1. Nuevas funciones de los sistemas Dell PowerEdge (R910, R810 y M910) Intel Xeon Intel Xeon...
  • Seite 74 No se ofrece E7-2803 * Los sistemas PowerEdge R810 admiten la familia de productos de procesadores Intel Xeon E7-4800/8800 de 4 x 130 W sólo si el sistema cuenta con dos unidades de suministro de energía. Los sistemas PowerEdge R810 no admiten el procesador Intel Xeon serie 7500 de 4 x130 W.
  • Seite 75 • Tarjeta vertical de memoria (PowerEdge R910 II) marcada con el número romano “II” o placa base (PowerEdge R810/M910 II) con búfer de memoria escalable Intel 7510 Los módulos DDR3L admitidos son RDIMM DRAM de 2 GB x8, 4 GB x8, 8 GB x8 y 16 GB x4.
  • Seite 76 • Tarjeta vertical de memoria (PowerEdge R910) no marcada con el número romano “II” o placa base (PowerEdge R810/M910) con búfer de memoria escalable Intel 7510. La memoria DDR3L es compatible con versiones anteriores del procesador Intel Xeon serie 7500 y funciona con un voltaje estándar (1,5 V).
  • Seite 77 Opción Descripción Redundant Memory Define el tipo de funcionamiento de la memoria si hay (valor predeterminado: instalada una configuración de memoria válida. Cuando la Disabled opción establecida es Mirror (Duplicación), se habilita la [Deshabilitado]) duplicación de la memoria, mientras que el modo Spare (Repuesto) permite sustituir la memoria.
  • Seite 78 Mensajes nuevos de la POST Mensaje Descripción System Memory Size: Muestra el tamaño de la memoria del sistema, su velocidad y su voltaje de funcionamiento actual. XX.X GB, System Memory Speed: XXXX MHz, Voltage: 1.5V or 1.35V TXT error occurred during La configuración no es adecuada o no admite la función TXT.
  • Seite 79 Habilitación del modo turbo inteligente del BIOS de Dell La función de modo turbo inteligente del BIOS de Dell permite al sistema operativo establecer el rendimiento del procesador en el modo turbo. Esta función retarda el inicio del modo turbo del procesador según el uso del procesador para mejorar la administración de energía.
  • Seite 80 Actualización de información...
  • Seite 81 Dell PowerEdge R810, R910 ve M910 Sistemleri Intel Xeon İşlemci E7-2800/4800/8800 Ürün Ailesi— Bilgi Güncelleştirmesi...
  • Seite 82 Bu yayında, marka ve adların sahiplerine ya da ürünlerine atıfta bulunmak için başka ticari marka ve ticari adlar kullanılabilir. Dell Inc. kendine ait olanların dışındaki ticari markalar ve ticari isimlerle ilgili hiçbir mülkiyet hakkı olmadığını beyan eder. Mart 2011...
  • Seite 83: Önemli Bilgiler

    Bu sistemler, sistem tanımlama panelinde (PowerEdge R910 II ve R810 II) veya kanatçık üzerinde (PowerEdge M910 II) "II" Roma rakamıyla işaretlenmiştir. Bkz. Şekil 1. NOT: "II" Roma rakamına sahip olmayan PowerEdge R810, R910 ve M910 sistemleri Intel Xeon işlemci E7-2800/4800/8800 ürün ailesini sınırlı özellik setiyle destekler. Bilgi Güncelleştirmesi...
  • Seite 84 Şekil 1. II Roma rakamına sahip yeni Dell PowerEdge Sistemlerinin Tanımlanması PowerEdge R910 II PowerEdge R810 II PowerEdge M910 II Bilgi Güncelleştirmesi...
  • Seite 85 Yeni Sistem Özellikleri—Dell PowerEdge Sistemleri (R810, R910 ve M910) Tablo 1 Yeni Dell PowerEdge sistemleri (R810 II, R910 II ve M910 II) tarafından desteklenen yeni özelliklerin listesini sunar. NOT: E7 işlemcilerine sahip ve "II" Roma rakamıyla işaretli yeni sistemler, Intel Xeon işlemci 7500 serisine sahip ve "II" Roma rakamıyla işaretlenmemiş...
  • Seite 86 E7-2803 Sunulmamıştır * PowerEdge R810 sistemleri, sadece sistem iki güç kaynağına sahip olduğu takdirde 4 x 130 W Intel Xeon işlemci E7-4800/8800 ürün ailesini destekler. PowerEdge R810 sistemleri 4 x130 W Intel Xeon işlemci 7500 serisini desteklemez. • Intel Xeon işlemci 7500 serisi ile E7-2800/4800/8800 ürün ailesinin kombinasyonu desteklenmez.
  • Seite 87 NOT: 1333 MT/s hızındaki RDIMM'ler maksimum 1066 MT/s hızında çalışır. • PowerEdge R810, sadece 1.35 V DDR3L'ye sahip dört 130 W Intel Xeon işlemci E7-4800/8800 ürün ailesini destekler. • "II" Roma rakamı ile işaretlenmiş PowerEdge R910 bellek yükseltici paneli DDR3L RDIMM'leri destekler.
  • Seite 88 • "II" Roma rakamı ile işaretlenmemiş bellek yükseltici (PowerEdge R910) veya Intel 7500 ölçeklenebilir bellek tamponuna sahip sistem paneli (PowerEdge R810/M910). DDR3L bellek, Intel Xeon işlemci 7500 serisi ile geriye doğru uyumludur ve standart gerilimde (1.5 V) çalışır. Sistem Kurulum Güncellemeleri Bellek Ayarları...
  • Seite 89 İşlemci Ayarları Ekranı Seçenek Açıklama Virtualization TXT güvenlik özelliği desteği için Etkin olarak ayarlanır. Technology NOT: Sisteminiz sanallaştırma yazılımı kullanmıyorsa (Sanallaştırma bu özelliği devre dışı bırakın. Teknolojisi) (Varsayılan Devre dışı) C States (C Durumları) Güç tasarrufu için Etkin olarak ayarlandığında, işlemci(ler) (Varsayılan Etkin) C6 ve paket C3e durumlarında çalışabilir.
  • Seite 90 Mesaj Açıklama Bir önceki önyüklemede Güvenilir önyükleme ortamı başlatma kontrol Başlatma Kontrol politikalarında bir politika bütünlük arızası oluştuğunda Politikasının görüntüler. çalıştırılmasında bir hata nedeniyle TXT SINIT ACM yürütmesi esnasında bir arıza oluştu CPU X Hatalı Başlatma Sistem BIOS'u, bir IERR arızasına sahip işlemciyi veya mevcut olan ancak başlatmada arıza veren işlemciyi raporlar.
  • Seite 91 çifti çıkartın. Dell BIOS Intelligent Turbo Modunun Etkinleştirilmesi Dell BIOS Intelligent Turbo Modu özelliği işletim sisteminin işlemci performansını turbo moduna ayarlamasına izin verir. İşlemci kullanımına bağlı olarak, bu özellik daha iyi yönetim için işlemci turbo modu başlatmasını geciktirir. Turbo modu, sistem kurulumuna ait İşlemci Ayarları ekranında etkinleştirildiğinde, bu özellik aşağıdaki BIOS kurulum seçeneklerini kullanarak...
  • Seite 92 Bilgi Güncelleştirmesi...