Table of contents
Table of contents
1 General safety instructions . . . . . . . . . . . . . . . . . . . . . 28
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
28
1
General safety instructions
H Safety precautions
Installation/assembly must be carried
out by an authorised qualified person
with due regard to the relevant
regulations. Failure to comply with the
regulations may result in material
damage and/or personal injury,
including risk to life.
▶ Check that the scope of delivery is
undamaged. Install only parts which
are in a faultless condition.
▶ Observe all the relevant instructions
for other system components,
accessories and spare parts.
▶ Before starting any work: disconnect
the system from the power supply
across all phases.
▶ Never install the product in wet
rooms.
▶ The installation location must not be
higher than 2000 m above sea level.
▶ More safety instructions can be found
in the technical documentation of the
indoor units.
H Intended use
The product must only be used to control
the following indoor units:
• Climate 3000i/Line Cool/Logacool
AC166i.2
• Climate 5000i/Easy Cool
The room controller must correspond to
the type CRC R-1.
MC R - 6721841757 (2023/03)