Werbung
Wall mounting instruction
Taking out the 4 x metal wall
mounting brackets and 4 x metal
screws for wall mounting brackets
from attachment, fix these brackets
onto the back of the product.
Lift the heater and aim the four
round holes on the brackets at back
of the heater to the 4 screws on
the wall, and slide the screw from
Position A to Position B by moving
the heater slightly.
Mark the positions of the four holes
to be drilled on the wall, and drill the
holes with the drill bit. Make sure
the distance between each holes is
same as the round holes on the wall
mounting brackets.
EN
23
Werbung
