Werbung
Remote control
OPERATION
1. Insert the socket plug into socket to power on, the buzzer will sound once,
displaying --, the
icon will flash, and it will be in standby mode. After
connecting to the app, the
2. Short press the
-button: The display shows the current ambient
temperature and the temperature mode icon is on.
There is a default target temperature of 25 °C. When the ambient temperature
is higher than or equal to the target temperature, the device will not heat.
When the ambient temperature is less than the target temperature by 1 °C,
the device is heats and the heating indicator light is on.
3. Press + or - to adjust the temperature. From 5–50 °C, the two digits flash for
5 times without any operation, then confirm and display the return to ambient
temperature.
4. Press the
-button once. The icons
shutdown, and press
setting, flash 5 times to enter the countdown and shut down. After setting up,
switch to displaying the ambient temperature. The icon
is off.
icon remains lit.
and
or
key to set the time from 0 to 24 hours. After
RC1
"+" increase temperature
RC2
Screen Off
RC3
"T" Timer
RC4
"-" decrease temperature
RC5
ON/OFF
RC6
Child Lock
RC7
ECO mode
lights up. Set a timed
is on, but the
light
EN
25
Werbung
