eta Rover 1248 90010 Bedienungsanleitung Seite 53

3. Remove the G2 water tank from the
vacuum cleaner.
4. Release the rubber stopper G4 and fill the water
tank with water.
5. Put the filled tank back into the
vacuum cleaner.
6. Switch on the device and select the required cleaning mode.
• When mopping, we recommend cleaning the individual rooms.
• Do not add any cleaning agents to the water, otherwise you will cause the holes in the
G5 water filters to plug up and the mop attachment to malfunction.
• Check the vacuum cleaner when mopping and top up the water as necessary, or rinse
the mop.
• Do not use the mop attachment on carpets and prevent the vacuum cleaner from
hitting the carpet.
• Remove and clean the moping attachment after use. Do not leave it installed on the
vacuum cleaner while charging.
Notes
EN - 53
EN