Moza R3 Benutzerhandbuch Seite 7

Pedal Spacing Adjustment Instructions
Move the pedal left or right to align the mounting holes with the base. Once aligned,
tighten the screws. Repeat the same process for the throttle, brake, and clutch pedals.
Instructions for Adjusting the Height of the Pedal Plate
Use a 2.5mm hexagonal spanner to turn the screws on the front of the pedal plate
counterclockwise, and a 7mm open-end spanner to remove the nuts on the back. Adjust
the plate height by moving it up or down to your desired position. Then, tighten the nuts
and screws securely to fix the plate in place. Repeat the same process for the throttle,
brake, and clutch pedals.
Wheel Base Technical Specifications
Frequency Range
Bluetooth version
2402MHz - 2480 MHz
V5
7