Connection Guide - Moza R3 Benutzerhandbuch

Connection Guide

Attach the base to the rig mount using either 2 or 4 screw holes on the bottom.
•
Plug in both the power supply and USB cable into their corresponding ports
•
located at the rear of R3 base. Then connect the USB cable to an available port on
your PC.
Briefly press down on the power button located at the back of R3 base to switch
•
it on.
Download the latest version of Moza Pit House from the help centre on the Moza
•
Racing website (www.mozaracing.com)
For more information and instructional videos, please visit our official website.
•
Desk Clamp Installation Guide
Attach the base to the clamp using the 4 mounting holes located on the underside of the
base. Tighten the clamp to the desk securely to prevent any movement during use.
Precautions
Do not expose the equipment to liquids and moisture to avoid fire/electric shock.
•
The device is not suitable for children under 6 years old, small accessories may ca
•
use a choking hazard!
Children under 13 years old must be accompanied by their parents.
•
Do not dismantle the equipment without the manufacturer's permission,
•
otherwise you will lose your warranty.
The equipment must be connected using the factory-supplied power supply to
•
prevent an electrical hazard.
Only use AC power supplied by a standard wall outlet to avoid damage to the pro
•
duct.
If you observe any abnormalities, please stop using it immediately and seek
•
assistance from MOZA officials or the authorized centre relevant to your concern.
This product use is limited to activities related to simulated driving, please
recognize the difference between simulated games and reality to ensure safe driving.
4