Moza R3 Benutzerhandbuch Seite 6

Steering Wheel Configuration
The ES Lite steering wheel can be set up easily and quickly in the MOZA Pit House
software.
RPM indicator switch mode
Indicator modes
RPM indicator timing
Brightness
SR-P Lite Racing Pedals
Pedal Installation Guide
Mount the pedal on the footrest and align it with the mounting holes. Fix the
•
M4×10 screws to the footrest using a 2.5 mm hexagonal spanner. To ensure
stability during use, it is recommended that all four screws for each pedal are
properly installed.
Plug the pedal cable into the corresponding connection port. You can use the
•
cable clip under the pedal base to keep the cabling tidy.
Connect one end of the RJ45 cable to the Wheel Base port on the pedal, and the
•
other end to the Pedal port on the wheelbase.
The working status of the pedal can be viewed in the MOZA Pit House software.
•
(If the unit appears greyed out or does not respond when pressed, unplug the
base, close MOZA Pit House, reconnect the base, and reopen MOZA Pit House.)
In addition to recalibrating the pedal, you can adjust the starting point, ending
•
point, and travel distance of the pedal to suit your preferences within MOZA Pit
House.
Throttle port
Select from three options: In-game RPM, Off, or
Constant
Two modes available: Mode 1 and Mode 2. Detailed
descriptions appear when hovering over the option.
Choose the LED activation timing: Early, Normal, Late,
or Custom (to match in-game RPM precisely).
Adjust the brightness level of the RPM/shift LEDs.
6
Wheelbase port
Clutch port