RCT Power Power Battery 5.7 Bedienungsanleitung Seite 50

4 Mechanical installation
4.1 Place of installation
Installation, service and maintenance work may only be carried out by
qualified electrician.

When moving the Power Battery the battery system can tilt.

Use the wall bracket to secure the Power Battery.

Do not place the Power Battery in potentially explosive atmosphere.

There must always be 2 people available to lift and carry the batteries.
The weight of the stacks is more than 18kg.
The location must be made of flame retardant
material. Do not place the Power Battery in
potentially explosive atmosphere.
Keep away from flammable materials.
Only install the Power Battery in interior areas.
Protect it from direct heat radiation
(e.g. sun, heater, etc.).
The following requirements must be fulfilled:

Indoor use (conditioned).

Ambient temperature +5 ... 30 °C.

Relative humidity 5 ... 85 % (non
condensing).
Make sure, the selected location and surface
supports the weight of the battery.
The selected location must be readily and safely
accessible at all times without additional aids (ladder,
scaffold).
14