Dell PowerConnect 8024 Handbuch Zum Einstieg Seite 55

步驟 1：
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can
(
Manager )
. Set up the initial SNMP version 2 account now. (
SNMP 2 )
. Return later and setup other SNMP accounts. (For more
information on setting up an SNMP version 1 or 3 account,
see the user documentation). (
SNMP
Would you like to setup the SNMP management interface now? [Y/N] n
( SNMP
To setup the SNMP management account you must specify the
management system IP address and the "community string" or
password that the particular management system uses to access the
switch. The wizard automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell Network
Manager or other management interfaces to change this setting and
to add additional management systems later. For more information
on adding management systems, see the User's Guide. (
Dell Network Manager
To add a management station:(
Please enter the SNMP community string to be used [public]:(
SNMP
註：
SNMPv1/2c SNMPv3
Please enter the IP address of the Management System (A.B.C.D) or
wildcard (0.0.0.0) to manage from any Management Station
{0.0.0.0}: (
{0.0.0.0}
SNMP
)
1 3
[Y/N]) y
IP
[public])public
存 別 存
停 返回
SNMPv3
IP
) 192.168.2.100
SNMP
[
)
)
SNMP
存 引擎 ID
(
(A.B.C.D)
(Dell Network
SNMP (
))
SNMP
15]
別 僅
視等 ) 止
(0.0.0.0)
53