Herunterladen Inhalt Inhalt Diese Seite drucken

Dell PowerConnect 8024 Handbuch Zum Einstieg Seite 199

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 84
Kurulum sihirbazı ön değerleri yukarıda tanımlandığı gibi yapılandırır. Sihirbazı tamamladıktan sonra
anahtar aşağıdaki gibi yapılandırılır:
SNMPv1/2c etkindir ve topluluk dizesi yukarıda tanımlandığı gibi ayarlanır. SNMPv3 varsayılan
olarak devre dışıdır.
Yönetici kullanıcı hesabı tanımlandığı gibi ayarlanır.
Bir ağ yönetim sistemi yapılandırılır. Bu yönetim istasyonundan, SNMP, HTTP ve CLI
arabirimlerine erişebilirsiniz. Ayrıca (0.0.0.0) IP adresini seçerek bu yönetim arabirimlerine
erişmek üzere tüm IP adreslerine izin verebilirsiniz.
Varsayılan yönetim VLAN'ı (1) için bir IP adresi yapılandırılır.
Bir varsayılan ağ geçidi yapılandırılır.
NOT:
Aşağıdaki örnekte, olası kullanıcı seçenekleri köşeli parantez [ ] içine alınmıştır. Ayrıca,
mümkün olduğunda, varsayılan değer {} içerisinde sunulmuştur. Hiçbir seçenek tanımlamadan
<Enter> tuşuna basarsanız varsayılan değer kabul edilir. Yardım metni parantez içindedir.
Aşağıdaki örnek, yukarıda belirtilen giriş değerleri kullanılarak örnek bir Dell Kolay Kurulum
Sihirbazı oturumu çalıştırmakla ilgili istemlerin ve yanıtların sırasını içermektedir.
Anahtar POST'u tamamlayıp başlatıldığında, aşağıdaki iletişim kutusu görünür:
Unit 1 - Waiting to select management unit)>
Applying configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly as possible.
You can skip the setup wizard, and enter CLI mode to manually
configure the switch. You must respond to the next question to run
the setup wizard within 60 seconds, otherwise the system will
continue with normal operation using the default system
configuration.Note: You can exit the setup wizard at any point by
entering [ctrl+z].
Would you like to run the setup wizard (you must answer this
question within 60 seconds)? [Y/N] y
1. Adım:
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can
.
Set up the initial SNMP version 2 account now.
.
Return later and setup other SNMP accounts. (For more
information on setting up an SNMP version 1 or 3 account, see
the user documentation).
Başlangıç Kılavuzu
197

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Powerconnect 8024f

Inhaltsverzeichnis