進階設定; Dhcp - Dell PowerConnect 8024 Handbuch Zum Einstieg

步驟 4：
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable. [0.0.0.0]:
(
This is the configuration information that has been collected: (
SNMP Interface (SNMP
User Account setup (
Password = ******** (
Management IP address = 192.168.2.1 255.255.255.0 (
192.168.2.1 255.255.255.0)
Default Gateway = 0.0.0.0 (
Operation Mode = Normal (
步驟 5:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
restart the wizard: [Y/N] (
Thank you for using Dell Easy Set up Wizard. You will now enter CLI
mode. ( Dell
進階設定
DHCP 伺服 擷
•
全管理 密碼
•
註：
8024
《CLI 參考指南》
從 DHCP 伺服器擷取 IP 位址

DHCP

DHCP
任何
1
擷 址
IP
註：
DHCP
)
) = "public"@192.168.2.100
= ********)
(N)
址
IP
8024F M6348
IP
IP
DHCP 伺服
刪除
IP
IP [0.0.0.0]:)
) = admin
= 0.0.0.0)
= )
(Y)
CLI
令
CLI
DHCP
具 DHCP 伺服
IP =
[Y/N]) y
)
參
網
55