Dell PowerConnect 8024 Handbuch Zum Einstieg Seite 213

‫ממשק‬ ‫עבור‬ ‫ביותר‬ ‫הגבוהה‬
‫התצורה‬ ‫את‬ ‫שתקבע‬ ‫עד‬ ‫מושבת‬
Please enter the IP address of the Management System (A.B.C.D)
or wildcard (0.0.0.0) to manage from any Management Station
{0.0.0.0}: 192.168.2.100
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts
and changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name. [admin]:admin
Please enter the user password:********
Please reenter the user password:********
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP address you use to access the CLI, Web interface, or SNMP
interface for the switch. Optionally you may request that the
system automatically retrieve an IP address from the network via
DHCP (this requires that you have a DHCP server running on the
network).
To setup an IP address:
Please enter the IP address of the device (A.B.C.D) or enter
"DHCP" (without the quotes) to automatically request an IP
address from the network DHCP server. [192.168.2.1]:192.168.2.1
Please enter the IP subnet mask (A.B.C.D or /nn).
[255.255.255.0]:255.255.255.0
‫תהיה‬ ‫מחדל‬ ‫כברירת‬ ‫המוגדרת‬
‫יופעל‬
.SNMPv3 SNMPv1/2c
‫וכו‬ ‫תצוגה‬ ‫מנוע‬ ‫מזהה‬
' .( ,
‫הגישה‬ ‫רמת‬ ‫מוגדרת‬ ‫זו‬ ‫מחרוזת‬
,
‫רק‬ ‫התחלתי‬ ‫באופן‬
SNMP .
‫לדוגמה‬ ‫עבור‬ ‫האבטחה‬
, SNMPv3)
‫תחילת עבודה‬
‫הערה‬
‫אם‬
:
‫של‬ ‫הניהול‬
‫גישת‬ ‫של‬
‫שלב‬
:2
‫שלב‬
:3
‫מדריך‬ |
218