Herunterladen Inhalt Inhalt Diese Seite drucken

Dell PowerConnect 8024 Handbuch Zum Einstieg Seite 158

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 84
1 단계 :
The system is not setup for SNMP management by default. To manage
the switch using SNMP (required for Dell Network Manager) you can
.
Set up the initial SNMP version 2 account now.
.
Return later and setup other SNMP accounts. (For more
information on setting up an SNMP version 1 or 3 account, see
the user documentation).
Would you like to setup the SNMP management interface now? [Y/N] y
To setup the SNMP management account you must specify the
management system IP address and the "community string" or
password that the particular management system uses to access the
switch. The wizard automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell Network
Manager or other management interfaces to change this setting and
to add additional management systems later. For more information
on adding management systems, see the User's Guide.
To add a management station:
Please enter the SNMP community string to be used [public]:public
주:
If it is configured, the default access level is set to the highest available access for the SNMP management
interface (
etc.). (SNMPv3
( :
Please enter the IP address of the Management System (A.B.C.D)
or wildcard (0.0.0.0) to manage from any Management Station
{0.0.0.0}: 192.168.2.100
156
.) Initially only SNMPv1/2c will be activated (
) SNMPv3 is disabled until you return to configure security access for SNMPv3 (e.g. engine ID, view,
SNMPv3
ID, view
).
SNMP
SNMPv1/2c

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Powerconnect 8024f

Inhaltsverzeichnis