Connections Choosing A Connection - Samsung DVD-P181 Bedienungsanleitung

CONNECTIONS
CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD
player with a TV and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or
disconnect any cables.
- Refer to the user's manual of the additional components (such as a TV) you are con-
necting for more information on those particular components.
Connecting to a TV (SCART)
- Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player
to the SCART(IN) terminal of your TV.
- If your TV is not equipped with a SCART you can select one of the following alterative
connections:
Connection to a TV (Video CVBS)
1
Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the rear
of the DVD player to the VIDEO (yellow)/AUDIO (red and
white) IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the TV/VIDEO button on the TV's remote control to
select Video.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 10 to 11)
- The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode
changes in the following sequence: (SCART RGB ➝ SCART CVBS).
WHITE
RED
YELLOW
Audio Cable
Video Cable
WHITE YELLOW
RED
9