Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If a thermostat and a thermostatic head are associated with the same zone, the room
temperature will be read by the thermostat. The zone can be switched on and off and the set-
point temperature can be selected both from the thermostat or from any of the heads.
EN
Settings
Head lockout*. With the head on, press on its control wheel for 10 seconds to lock it and avoid
unwanted changes. Head lockout is shown on the LED display:
LC. The head is locked.
10 s
*Note: Ensure that the head is switched on before locking it. If the head is off and its control
wheel is pressed for 10 seconds, it will reset, losing association with the zone and displaying
the icon "- -". In this case, it will be necessary to re-associate and configure the head.
Unlocking the head. With the head locked, press its control wheel again for 10 seconds to
unlock it. The LED display will no longer show the head lockout status.
10 s
18
Werbung
