Airzone AZ BLUE C Serie Bedienungsanleitung Seite 17

Likewise, to switch off a head that is on, briefly press its control wheel to reactivate it and turn it
in the opposite direction until the Off status appears on the LED display.
EN
Set-point temperature. The LED display of the wireless thermostatic head shows the selected
set-point temperature. It is possible to regulate the set-point temperature by turning the head
control wheel in the corresponding direction until the desired value is shown.
The icon will light up on the LED display of the head to indicate that demand is being
generated. When the head's room temperature reading reaches the desired set-point
temperature, the icon will turn off.
17