Kärcher HD 5/12 C Bedienungsanleitung Seite 15

Unit components
Please fold out illustration page at the front
1 Nozzle rest
2 Handle
3 High-pressure outlet
4 Pressure/flow control (only HD 6/13 ...)
5 Water connection
6 Oil level display
7 Oil reservoir
8 Hood
9 Unit switch
10 Fastening screw for hood
11 Hose rest
12 Handgun support
13 Nozzle
14 Marking of the nozzle
15 Spray lance
16 Hand-held spray gun
17 Safety catch of hand-held spray gun
18 Lever of hand-held spray gun
19 High-pressure hose
20 Push-handle
21 Cable holder
22 Push-handle clamping screw
23 Detergent suction-hose with filter
24 Detergent metering valve
25 Accessories box
26 Hose reel
27 Crank handle
For your safety
Before you use the cleaner for the first time,
read these operating instructions and take
special note of the accompanying booklet
"Safety Instructions for High-Pressure Clean-
ers" No. 5.951-949.
Use of the cleaner
Use this unit exclusively for
– cleaning with high-pressure jet and deter-
gent (e.g. cleaning of machines, vehicles,
buildings, tools),
– cleaning with high-pressure jet without de-
tergent (e.g. cleaning facades, terraces,
gardening equipment).
For stubborn dirt we recommend the dirt
blaster as an optional accessory.
Safety features
Relief valve (only HD 6/13...)
On reducing the flow rate with the pressure
and flow control, the relief valve opens and
part of the water runs back to the suction side
of the pump.
Pressure switch
If the lever of the hand-held spray gun is re-
leased, the pressure switch switches the
pump off. If the lever is retracted, the pressure
switch switches the pump on again.
The overflow valve and pressure switch have
been set and sealed at the factory.
Adjustments are made only by Customer
Service.
English
15