Energy Efficiency; Notes On The Ec Declaration Of Conformity; Technical Data And Dimensions - Nice Elero Roltop/D+ 868/915 Betriebs- Und Montageanleitung

Energy efficiency | Notes on the EC declaration of conformity
►Groups of materials such as plastics and metals of vari-
ous kinds are sorted for recycling and disposal process.
Dispose electrical and electronic components
Disposal and recycling of electric and electronic compo-
nents must comply with the applicable national laws and
regulations.
11 Energy efficiency
Operators with the first 2 digits of the serial number ≥ 65
on the rating plate comply with the legally required con-
sumption values of the European Ecodesign Regulation
2023/826.
If no network routing is active 5 minutes after the end of the
main function „Drive up" or „Drive down" (active mode), the
power consumption is less than 0.5 W (standby mode). The
consumption in standby mode does not take into account
the energy consumption of the accessories. For accesso-
ries, please read the corresponding operating instructions.
The power consumption in network standby mode is less
than 2 W.
12 Notes on the EC declaration of
conformity
elero GmbH hereby declares that the tubular drive RolTop
/D+ 868 complies with the basic prerequisites and the other
relevant provisions of the EC directives. The complete
declaration of conformity can be found in the download area
of our website
www.elero.com/en/downloads/downloads-service/ .
13

Technical data and dimensions

The indicated technical data are subject to tolerances (ac-
cording to the respective applicable standards).
After installing the drive, the R+S mechatronics technician
(roller shutter and sun protection mechatronics technician)
must note the installed type of drive and the installation
location in the installation and operating instructions.
© elero GmbH EN | 7