schellenberg POWERLIFT 800N Bedienungsanleitung Seite 14

• The garage door drive was designed and manufactured in accordance with local regulations. The installer must be
familiar with the local provisions in relation to the installation of the garage door drive.
• Unquali ed people or personnel who do not know the occupational safety standards for automatic doors and gates
may under no circumstances carry out installation work or intervene in the garage door drive.
• People who disregard the applicable safety standard for installation and maintenance are liable for damage, injuries,
costs, expenses or claims arising from this disregard for the safety standards.
BEFORE INSTALLATION
• The garage door drive is not designed for operation of sti doors.
• Check that the door can be opened and closed easily by hand.
• Check that the compensation springs have been set correctly by lifting the door approx. one metre and then
letting it go. The door may not move upwards or downwards from this position.
• The compensation springs on the garage door may only be readjusted by a competent person.
• The garage ceiling must be suitable for installation of the garage door drive. Check whether additional
fastening components are required.
SAFETY INSTRUCTIONS FOR INSTALLATION
• During installation work, all applicable provisions for occupational safety and all applicable provisions for
operating electrical devices must be followed. The required national guidelines must also be observed.
• Follow the instructions and information in this installation manual. If you are ever unsure during installation,
contact our customer service (see back page).
• Potential hazards within the meaning of DIN EN 13241-1 can be eliminated by installing the product as per
this instruction manual.
• Electrical connection work may only be carried out by a trained electrician.
• The garage door should be balanced. Immovable or sti doors must be repaired. When unbalanced, garage
doors, door springs, cables, pulleys, supports and rails are placed under extreme stress, which can result in
serious injuries. Try not to detach, move or realign the door. Seek out a suitable trained technician.
• For garages without additional access, an emergency release for the rotary handle (item no. 60553) or an
emergency release lock (item no. 60511/60611) is required. These devices prevent you from being locked out
of the garage in the event of a defect or power cut.
• Before tting the garage door drive, remove any existing locks and locking devices as per the assembly
instructions for the garage door in order to ensure unencumbered use of the garage door drive.
• Install all optional operating elements (e.g. key switch or wall button) at a height of at least 1.5 m and within
sight of the garage door, but away from moving parts and out of the reach of children.
• A x the anti-pinching warning labels in a clearly visible location or near the switch.
• A x the manual release sticker near the garage door drive.
• Before commissioning your garage door drive, ensure that there are no obstacles in the travel path of the door.
• Read the instructions carefully.
• During installation, adhere to the minimum distances shown in the gures.
• Drilling dust, dirt or shavings must not enter the garage door drive head or rail system. Cover these compo-
nents carefully during installation work.
SAFETY INSTRUCTIONS FOR COMMISSIONING
• Check your power connection. The values must match the values given in this operating manual.
This information is also found on the nameplate of the garage door drive.
• The power connection in the garage must comply with local provisions.
14