Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.2 Control panel
AFTER INSTALLATION WAIT 4-6 HOURS, BEFORE YOU CONNECT
YOUR APPLIANCE TO THE MAINS!
B1
Press to adjust the temperature of the cooling compartment from
+2
0
B2
Press to select the operating mode: S
L1
Indication of the set temperature of the cooling compartment.
L2
Indication of activated S
L3
Indication of activated S
SUPER-function for models with freezer only.
WARNING You must unplug the appliance to disconnect it from
the mains.
4.3 Before initial operation
1. Clean the interior of the appliance as well as all accessories using lukewarm
water and neutral soap to eliminate the typical smell of a brand-new appliance.
Strictly observe the advice given in chapter
4.4 Temperature setting
1. Press the
MODE
2. Press the
ADJUST
compartment.
C to +8
0
C.
-button (B2) to activate user-defined setting.
-button (B1) to adjust the temperature of the cooling
Controls
MART
Indicators
-Mode.
MART
-Mode.
UPER
CLEANING AND MAINTENANCE
40
, S
or user-defined.
UPER
.
Werbung
