Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To our customers
Dear Customer:
To ensure that you can assemble and use it smoothly, we have prepared this assembly and use
guide instruction manual. Please read the following content carefully and operate according to the
instructions to ensure the safety and convenience when using.
If you encounter any problems during use, you can scan the QR code, company address and USB
flash drive information to obtain the relevant instructions and videos. When the machine breaks
down, please refer to the name of the corresponding part in the machine, and contact us with the
problem and machine condition according to the after-sale e-mail provided on this page.
After-sales Email: service@twotrees3d.com
Inquiry Email: info@twotrees3d.com
Web page for information
TF card information
www.twotrees3d.com
Login to www.twotrees3d.com,
Find the USB drive in the toolkit
find the corresponding model information
and equipment use information tutorials.
To our customers
Safety Warning:
1. When using the machine for the first time, please make sure that the machine installation is firm.
2. When danger occurs, press the emergency stop button quickly.
3. Wear safety glasses when operating the machine.
4. Please use a brush to remove debris, do not blow with your mouth.
5. Be careful with sharpness when using Milling tools or sanding workpieces.
6. Install Milling tools, make sure it is solid.
7. When loading and unloading, setting knife, measuring and cleaning, please make sure that the machine must
be stopped before operation.
8. Do not wear cotton gloves during operation.
9. Do not place measuring tools or other sundries within the scope of the workbench.
10. Clamp the workpiece firmly, do not start engraving when it cannot be loosened or not clamped.
EN
Werbung
