Meaco MeacoDry Arete Two 10L Bedienungsanleitung Seite 95

Replacing the H13 HEPA filter
The dehumidifier comes with a free H13 HEPA filter. This H13 HEPA filter can be inserted into the
dehumidifier to enable air purification, however this is optional - the dehumidifier can be used without
the H13 HEPA filter, this means it will dehumidify the air only and not purify it.
Although we do highly recommend using the dehumidifier with a H13 HEPA filter, if you would like a
quieter dehumidifier, removing the H13 HEPA filter will reduce the noise level by 4-5 decibels.
• The H13 HEPA filter is not life-long and must be replaced when the colour changes from white to
grey (it depends on the environment the dehumidifier is being used in but the H13 HEPA filter will
need replacing roughly every 3 months).
• The H13 HEPA filter can be hoovered every so often to remove any dust or dirt.
• To insert/replace the H13 HEPA filter, place it inside the combined filter case and dust filter, then
slide the combined filter case and dust filter into the dehumidifier.
• Replacement H13 HEPA filters can be purchased from eu.meaco.com.
Cleaning the water tank
To clean inside the water tank, simply remove the water tank lid.
17 [EN]