Werbung
Verfügbare Sprachen
Verfügbare Sprachen
First steps
When you first receive your dehumidifier, it is important you follow the steps below carefully:
1. Check your dehumidifier and its box and packaging for any transport damage. In case of damage,
inform the sender immediately.
2. Leave the dehumidifier to stand for six hours before turning it on. This will allow any refrigerant that
may have moved during transit to settle.
3. Choose where you would like to locate your dehumidifier. This dehumidifier has been carefully
designed allowing you to place the dehumidifier as close to a wall as you wish.
4. Remove the plastic bag around the H13 HEPA filter and insert it in the back of your dehumidifier.
This will enable air purification as well as dehumidification. For further instructions, see page 16.
5. Plug the dehumidifier into the mains and turn it on using the Power Button. Allow the dehumidifier
to gauge an accurate reading of the humidity level in the environment it is situated in for the first 10
minutes.
6. Open the louvre to allow air to move freely.
7. Use page 10 to determine the correct setting for your dehumidifier usage.
[EN]
8
Werbung
