Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
When the dehumidifier is first plugged into the mains it will beep once, the power and timer button will
light up.
• All buttons on the control panel only require a short press: press the buttons firmly and quickly.
• When in use the louvre must be open - this can be done manually.
Control panel
ON/OFF: Press the power button once to turn the dehumidifier on. The display will turn on
and the dehumidifier will start to run. To turn the dehumidifier off press the power button
again.
Smart Humidity Mode: Press this button and the dehumidifier will default to a target
humidity of 55%RH.
Variable Humidistat: To set your dehumidifier to reach a target humidity other than 55%
continue to press the Smart Humidity Mode button and scroll through the options in the
following order: 70, 65, 60, 55, 50, 45, 40,
will stay displayed with a circle around it.
Continuous: With this target the dehumidifier will continue to run and only turn off when the
water tank is full, regardless of the humidity level.
Once the target humidity level has been reached (-3%) the dehumidifier will stop. Every 30
minutes the fan will run and check the humidity level, the dehumidifying indicator will turn off.
[EN]
. Once you have reached your desired target, it
10
Werbung
