Airzone Aidoo Pro AZAI6WSPVA1 Bedienungsanleitung Seite 17

INFORMATION AVAILABLE ON AIRZONE CLOUD
To perform advanced
configuration of the
device, download the
Airzone Cloud app.
Device information
Alias. Allows you to assign an alias to identify each device.
Name.* Displays the name of the device.
MAC. Displays the MAC address of the device.
Firmware. Displays the webserver version of the device.
Wi-Fi. Displays the network linked to the device.
IP address.* Displays the IP address of the device.
Network settings.* Displays the advanced configuration options for the linked network.
Integration.* Displays the integrations available through the Webserver and allows you to make
the following configurations depending on the integration selected:
Local:
•
Local API. Enables the option of integration with third parties via Local API.
•
BACnet IP Airzone. Configures the integration port for communications using the BACnet
IP protocol and allows editing of the BACnet ID and BACnet port.
•
mDNS. Enables the mDNS service for device discovery within a local network.
•
SDDP - Control4. Enables local integration with Control4.
•
Modbus TCP Airzone. Configures the integration port for communications using the
Modbus TCP/IP protocol.
Integration port:
•
Modbus RTU Aidoo. Configures the integration port for communications using the Modbus
RTU protocol and allows editing of the Modbus ID and selection of communication speed.
•
BACnet MS/TP Aidoo. Configures the integration port for communications using the
BACnet MS/TP protocol and allows editing of the MAC address, BACnet ID, communication
speed, maximum number of master nodes, and maximum number of frames.
•
Airzone system gateway. Configures the integration port so that the device functions as an
air to water gateway. Once set, the usual settings that can be made on the Aidoo device are
disabled and only the device information section will be visible.
•
Modbus RTU Airzone. Configures the integration port for communications using the
Modbus RTU protocol.
•
BACnet MS/TP Airzone. Configures the integration port for communications using the
BACnet MS/TP protocol.
* Only available in Bluetooth configuration.
To access the
advanced settings
follow the steps described
in the Airzone Cloud
support section.
EN
17