Silvercrest SFR 3 A1 Bedienungsanleitung Seite 66

–
" " for medium-sized bobbles and textiles with
moderate structure (medium distance to the cutter
knives),
–
„ " for small lint/bobbles and fine textiles (small
distance to the cutter knives)
–
Remove the spacer 5, only for very fine lint (virtually
no spacing to the cutter knives) .
3) Push the On/Off switch/Speed switch 1 to the
required speed level .
We recommend that you start working at speed level 1 .
If the results are satisfactory and you feel comfortable
handling the appliance then you can switch up to
speed level 2 .
4) Guide the shaver foil 4 lightly and without pres-sure
over the material . The fluff and bobbles will be shaved
off and collected in the fluff collector 3 .
5) When you want to stop, push the On/Off switch/
Speed switch 1 back to speed level 0 .
Note: (1) This appliance is equipped with a safety
cut-out . The appliance switches off automatically, when
you turn off the shaver foil 4 . (2) Empty the fluff col-
lector 3 regularly . If the fluff collector 3 is overfilled,
the cutting blades will work more slowly even though
the batteries are not yet weak .
GB │ MT │ 63 ■