Binder PURE AQUA SERVICE Montage- Und Betriebsanleitung Seite 41

GB / US
5. Start up
5.1. Rinsing when commissioning a new cartridge
• Connect the supplied silicon tube to the water drain
Figure 9: Connections on the pressure tank cover, water drain with connected tube
• Introduce the free end of the silicon tube into a receptacle of a volume of at least 10 liters and secure it
against moves
• Open the water drain on the pressure tank cover (turn it anti-clockwise)
Figure 10: Closed water drain
(position during operation)
• Slowly turn on the freshwater supply tap and rinse the system with approx. 10 liters of water
• Close the water drain
• All water connections must be checked for tightness and leaks. This is the operator's responsibility.
Mounting instructions BINDER Pure Aqua Service (E2) 07/2022
Figure 11: Open water drain
(to replace or rinse the cartridge)
page 41/114