Before Use - Xblitz Go3 Bedienungsanleitung

8. Function key "DOWN" & start emergency recording & in video
playback mode, longer holding deletes selected recording
9. Function button "OK" & start/stop video

03. BEFORE USE

1. It is recommended to use original micro SD cards of class 10 or higher.
2. Before inserting the card into the recorder, it must be formatted on
the computer in the FAT32 or exFAT file system (depending on the
card) and then in the recorder.
3. The camera must be switched off when inserting the memory card,
otherwise the card and the device may be damaged. The same
applies when removing the card from the device.
4. When the memory card fills up, the oldest unprotected recordings
are overwritten.
5. It is recommended that the G - SENSOR option is set to the minimum,
in order to avoid the preservation of unnecessary material caused,
for example, by uneven road surfaces and thus the loss of space on
the memory card.
6. Sound: the device has a built-in condenser microphone that records
all ambient noises. Sounds may overlap causing distortion.
04. MONTAGE
SEE FIG. B
1. Select and clean the camera mounting location.
2. Mount the camera with or without pre-applied electrostatic film.
3. Insert the memory card into the slot in the camera.
4. Point the camera lens towards the roadway.
5. Connect the power supply to the camera.
6. Route the power supply cable so that it does not obstruct the view
while driving.
7. Plug the power supply plug into the car's cigarette lighter socket.
05. DESCRIPTION OF THE MENU OPTIONS
1. Wi-Fi: allows you to enable or disable the Wi-Fi module and scan
the QR code needed to download the app, as well as displaying the
network name and password.
2. Resolution: allows you to change the resolution of recorded video
files
3. Loop recording: allows you to change the length of recorded loops.
4. Audio recording: allows you to enable or disable audio recording
on the camera.
13