Before Use - Xblitz Dual Core Bedienungsanleitung

BEFORE USE
1. It is recommended to use high quality microSD cards class 10th (4 to 64 GB)
2. It is necessary to format the memory card to FAT32format before inserting
it into the recorder.
3. Memory card should be installed when the device is off, otherwise
the card damage or the device damage may occur.
4. The battery allows you to record for no more than 5 minutes without
external power supply source
5. When the memory card is full, the oldest unprotected video
will be overwritten
6. It is recommended
intended purpose. Do not use the motion detection" or "parking mode" while
driving as this may cause automatic turning the device on and off, during
a stop at the intersection, It is recommended to set the G sensor sensitivity
level at a minimum, in order to avoid securing unnecessary recordings and
the loss of space on the memory card. The memory card must be formatted
in FAT 32 format first
7. Sound: the device has a capacitive microphone, recording all the sounds
from the environment. The sounds may overlap causing distortion.
NOTE: Use chargers with a charging current up to 1,5 A only.
(Do not connect directly to the 220 / 230V socket.) Non-use
to the recommendations may cause damage to the camera or in
the extreme case lighting up the device.
NOTE: The car charger should be installed in a safe place
location (DCinput: 12 or 24V, output: 5V)
to use the device's functions
on the PC and then on the recorder.
in accordance with their