Herunterladen Diese Seite drucken

Xblitz DUAL VIEW Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
01. BEFORE
USE
1. It is recommendedto use brand name class10 micro SD cards(8 to 128GBcapacity).
2. Before putting the memory card in the dash camera, remember to format it according to
the FAT32 system or exFAT system on your computer, and then on the camera.
3. Remember to turn the device off before putting the card inside or taking it out.
Inserting the memory card into a dash camera that is turned on can causedamage to the
card and the device.The same goesfor removing the card memory.
4. A fully charged battery allows for a continuous recordingwithout any power sourcefor
no more than 3 minutes. The battery is mainly used to power the device settings menu.
S.When the memory card gets full, the oldest files will be overwritten.
6. Use the device as intended. Do not turn on the motion detector function when driving,
it can causethe camera to randomly turn on and off when, for example, waiting at the
intersection.
7. It is recommended to set the G-SENSOR sensitivity on the lowest setting, so that the
device will not protect unwanted recordings, like for example, from driving on bumpy
roads. The protected recordings will not be overwritten when the memory card is full.
8. The device has a condenser microphone, which records all surrounding sounds, in result,
the sounds can overlap and cause distortions.
02. INCLUDED
IN THE SET
I. Xblitz
Dual View
dash camera
2. Car charger
3. Camera
holder
4. Micro
SD card reader
03. INSTALLING
Look at.Fig.2 page 3
A. Lighter Socket
I. Choose an appropriate place of installation.
camera
view.
2. Thoroughly clean the chosen place before mounting the device.
3. Mount
the camera
4. Drag the cable according to the picture.
S. Place the charger in the power input situated in the cigarette lighter socket.
6. Put the memory card into the slot in the camera. Make sure that the device is turned
off.
7. Put the micro USBplug of the charging cable inside the camera port.
8. Mount
the camera in the holder.
THE CAMERA
in the desired
location.
15
Make sure that nothing is blocking the

Werbung

loading