Designated use
This product is designated for connecting 4 pin 12 V RGB strips with a width of
10 mm. Dieses Produkt ist nicht geeignet für den gewerblichen Einsatz.
• When applying to water-resistant LED strips, the silicone coating has to be
removed from the contacts.
• The LED strip will be no longer water-resistant at the connection points.
• Please ensure that the connectors may only be used indoors.
• Whether your LED strip can be lengthened beyond the original lenght depends
on the used power supply.
• The intended use also includes the observance of all instructions in the user
manual.
• If you have any questions regarding your LED strip, please refer to the user
manual of the manufacturer.
• Should you require further information, or should particular problems occur
which are not handled in this manual, please contact the technical support of
the manufacturer.
20