Operating Instructions - Autool Em355 Benutzerhandbuch

Operating
instructions
Be cautious of injury risks! When handling battery acid, wear
protective glasses and appropriate protective clothing. If acid
splashes on you, immediately rinse with clean water thorough-
ly. Seek medical attention if necessary.
Do not inhale any released gases or vapors.
The supplied voltage must be set strictly according to the
instructions on the equipment nameplate, and the provided
voltage and wire specifications must match. The equipment
clamps must be used correctly as required, ensuring proper
polarity. Keep the equipment clean, with all cables intact and
neatly arranged.
After each charging session, please turn off the machine
power and unplug the power socket.
Do not open the machine cover casually. If maintenance is
needed, please contact our professional repair personnel.
Keep the machine away from areas where children can easily
reach. Ensure proper grounding to avoid electric shock.
During use, do not leave the machine unattended. Ensure that
someone is monitoring it throughout the process to handle any
issues promptly. Be cautious of water, humidity, and ensure
proper ventilation.
If the power cord is damaged, it must be replaced by the manu-
facturer or other qualified service personnel to avoid danger.
Before use, please read the instruction manual carefully and
follow the relevant instructions and precautions. Ensure
proper protection of the battery and the machine.
Warning! The top of the machine has a warning icon. Ensure
that the environment where the machine is used meets the
required conditions. Failure to do so may damage the machine
or connected equipment and could pose a serious safety risk.
Warning! Flammable gases are produced during charging.
Open flames are strictly prohibited in the operating area.
Warning! For the machine's accessories, it is best to use only
those provided by our company. Do not replace them
indiscriminately. If replacement is necessary, contact our staff
to ensure compliance with usage requirements. Before using
the machine, make sure the exterior is intact and free from
8